Fujitsu P3PC-1492-04ENC2 4.6Setting "Scanning Area

Specify the scanning area in the preview window as follows:

Setting:

1.Press the left mouse button to specify the origin (top left corner) of the scanning area. (The cursor appears as a "+".)

2.Drag the mouse to show the outline of the scanning area. (As the cursor moves, a range frame is shown.)

3.Release the left mouse button again to set the range (bottom right corner) of the scanning area.

Movement:

1.Move the cursor into the range frame. (The cursor appears as a hand.)

2.Press the left mouse button. (The cursor changes to a fist.)

3.Drag the mouse to move the range frame.

4.Release the left mouse button to set the current range.

Cancellation:

The range frame can be canceled by either of the following ways:

−Click the left mouse button outside the range frame (inside the scan document).

−Select other paper types.