Fujitsu PG-LT302 1.4.2 Device Driver Installation (For PRIMERGY FT)

64
1.4.2 Device Driver Installation (For PRIMERGY FT)
Notes
• This product can be installed only to FT1. It cannot be installed to FT2.
• Two of this product cannot be installed at the same time.
• This pr oduct can only be used from a FTvirtual Server (professional-use OS). This product cannot
be used from a CoServer (input-output OS).
• FT model cannot restore the system using Automated System Recovery (ASR) set or system
recovery disk. For restoration, use the recovery CD supplied with the server.
• For installation of the internal 5-inch option, refer to the "User ’s Guide" of the FT model.
For Windows Server 2003
1Install this product to FT1.
2Turn on the power of FT1 and FT2, and start the CoServer in online
mode.
3Log on to the CoServer1 with administrator privileges.
4Click the [Start] button → [Control Panel] → [System].
5Select the [Hardware] tab and click [Device Manager].
The device manager starts.
6Double click [Other devices], and then double click [QUANTUM
ULTRIUM 3 SCSI Sequential Device].
7Select the [Driver] tab and click [Update Driver].
The Setup Wizard appears.
8When the "Can Windows connect to Windows Update to search for
software?" message appears, click [No, not this time] and then
click [Next >].
Follow the wizard for installation.
9For installation methods, click [Install from a list or a specific
location] and click [Next >].
10 For search and installation options, select [Search for the best
driver in these locations] and set the following options.
• Uncheck [Search removable med ia (floppy, CD-ROM, etc.)].
• Check [Include this location in the search] and specify the folder which restored the device
driver.
• When rest ored in the floppy disk drive A
A:\LTO3HH