TIMER OPERATION
Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle).
Before using the timer function, be sure that the remote control unit is set to the current time (See page 5).
To Use the ON timer or OFF timer
1 | Press the START/STOP button |
(if the unit is already operating, proceed to step 2). |
The indoor unit’s OPERATION indicator light (red) will turn on.
2Press the TIMER button to select the OFF timer or ON timer operation.
SLEEP |
|
| TIMER |
| TIMER | ON | |
|
|
| |
MASTER | SET | SET | FAN |
CONTROL | TEMP. | TIME | CONTROL |
Each time the button is pressed the timer function changes in the follow- | To Cancel the Timer | |
Use the TIMER button to select “TIMER | ||
ing order: | ||
| RESET.” |
sRESET sOFF sON PROGRAM(OFF → ON, OFF ← ON)t
The indoor unit’s TIMER indicator light (green) will turn on.
3Use the SET TIME buttons to adjust the desired OFF time or ON time.
Set the time while the time display is flashing (the flashing will continue for about five seconds).
button: Press to advance the time. 
button: Press to reverse the time.
About five seconds later, the entire display will reappear.
The air conditioner will return to normal operation.
To Change the Timer Settings
Perform steps 2 and 3.
To Stop Air Conditioner Operation while the Timer is Operating
Press the START/STOP button.
To Change Operating Conditions
If you wish to change the operating conditions (Mode, Fan Speed, Thermostat Setting), after making the timer setting, wait until the entire display reappears, then press the appropriate buttons to change to the desired operating condition.
To Use the PROGRAM timer
1 | Press the START/STOP button |
(if the unit is already operating, proceed to step 2). | |
| The indoor unit’s OPERATION indicator light (red) will turn on. |
2 | Set the desired times for OFF timer and ON timer. |
See the section “To Use the ON timer or OFF timer” to set the desired |
mode and times.
About three seconds later, the entire display will reappear. The indoor unit’s TIMER indicator light (green) will turn on.
3Press the TIMER button to select the PROGRAM timer operation (either OFF → ON or OFF ← ON will display).
The display will alternately show “OFF timer” and “ON timer”, then change to show the time setting for the operation to occur first.
●The PROGRAM timer will begin operation. (If the ON timer has been selected to operate first, the unit will stop operating at this point.)
About five seconds later, the entire display will reappear.
SLEEP |
|
| TIMER |
| TIMER | ON | |
|
|
| |
MASTER | SET | SET | FAN |
CONTROL | TEMP. | TIME | CONTROL |
To Cancel the Timer
Use the TIMER button to select “TIMER RESET.”
The air conditioner will return to normal operation.
To Change the Timer Settings
1.Follow the instructions given in the section “To Use the ON Timer or OFF Timer” to se- lect the timer setting you wish to change.
2.Press the TIMER button to select either OFF → ON or OFF ← ON.
To Stop Air Conditioner Operation while the Timer is Operating
Press the START/STOP button.
To Change Operating Conditions
If you wish to change the operating conditions (Mode, Fan Speed, Thermostat Setting), after making the timer setting, wait until the entire display reappears, then press the appropriate buttons to change to the desired operating condition.
