SWING OPERATION
Begin air conditioner operation before performing this procedure.
To select Vertical airflow SWING Operation
Press the AIR FLOW DIRECTION VERTICAL SWING button .
The SWING indicator light (VERTICAL SWING) (orange) will turn on.
In this mode, the UP/DOWN air direction flaps will swing automatically to direct the air flow both up and down.
SET SWING SET SWING
TIME TEST
ENERGYADJUST RUN ACL
SAVE
To Stop Vertical airflow SWING Operation | Example: When set to vertical swing |
|
Press the AIR FLOW DIRECTION VERTICAL SWING button once again.
The SWING indicator light (VERTICAL SWING) will turn off.
Airflow direction will return to the setting before swing was begun.
About Swing Operation
●The range of swing is relative to the currently set airflow direction.
Air flow direction set | Range of swing |
1 | 1 to 3 |
2 | 1 to 4 |
|
|
3 | 2 to 5 |
4 | 3 to 6 |
5 | 4 to 7 |
6 | 5 to 7 |
|
|
7 | 1 to 7 (All range) |
Air direction range (See page 10, Fig. 9)
●If the swing range is not as desired, use the remote con- trol unit’s AIR FLOW DIRECTION VERTICAL SET button to change the range of swing.
●The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.
●During use of the Cooling and Dry modes, do not set the air UP/DOWN direction flaps, in the Heating range (5 to 7) for long periods of time, since water vapor may con- dense near the outlet louvers and drops of water may drip from the air conditioner.
To select Horizontal airflow SWING Operation
Press the AIR FLOW DIRECTION HORIZONTAL SWING button.
The SWING indicator light (HORIZONTAL SWING) (orange) will turn on.
In this mode, the RIGHT/LEFT air direction louvers will swing automatically to direct the airflow both right and left.
SET SWING SET SWING
TIME TEST
ENERGYADJUST RUN ACL
SAVE
To Stop Horizontal airflow SWING Operation | Example: When set to horizontal swing |
| |
Press the AIR FLOW DIRECTION HORIZONTAL SWING button |
|
once again. |
|
The SWING indicator light (HORIZONTAL SWING) will turn off. |
|
Airflow direction will return to the setting before swing was begun. |
|
About Swing Operation
●The range of swing is relative to the currently set airflow direction.
Air flow direction set | Range of swing |
1 | 1 to 5 (All range) |
2 | 1 to 3 |
3 | 2 to 4 |
4 | 3 to 5 |
5 | 1 to 5 (All range) |
|
|
Air direction range (See page 10, Fig. 10)
●If the swing range is not as desired, use the remote con- trol unit’s AIR FLOW DIRECTION HORIZONTAL SET but- ton to change the range of swing.
●The SWING operation may stop temporarily when the air conditioner’s fan is not operating, or when operating at very low speeds.