How to Perform a Scan (for Mac OS users)
179
6. Press the [Scan] button on the ScanSnap.
DScanning starts.
DThe [Scan] button on the ScanSnap flashes blue during scanning.
The following window appears to show the scanning progress.DWhen scanning is completed, the corresponding action of the selected profile is performed.zThe [Scan] button setting is set to [Duplex Scan (Double-sided)] by default.
Note that you can switch the [Scan] button setting to [Simplex Scan (Single-sided)] in
ScanSnap Manager. For more details, refer to "Changing the Scan Settings" (page
181).
zYou can also start the scanning from the ScanSnap Manager menu.
For more details, refer to "ScanSnap Manager Menu" (page 170).
zDo not connect and disconnect the ScanSnap and other USB devices during scanning.
zDo not close the ADF paper chute (cover) during scanning.
zDo not switch users during scanning.
zBy default, documents are scanned by the following settings: [Image quality: Normal],
[Color mode: Auto Color Detection], [Scanning side: Duplex Scan].
For information on how to change scan settings, refer to "Changing the Scan Settings"
(page 181).
zBefore scanning documents of printed or handwritten text, select the [Scanning] tab J
[Option] button J [Setting for text only document] checkbox in the ScanSnap setup
window.
zThe application that starts after scanning varies depending on what is selected in the
[Application] tab in the ScanSnap setup window. For details, refer to the ScanSnap
Manager Help.
zThe output image may slightly differ from the original document in size.
zWhen Cardiris is started and becomes active (Cardiris selected in the menu),
ScanSnap Manager automatically links with the active application, the settings of which
are used for scanning. Automatic linkage is disabled when the application is not active.
For information on automatic linkage, refer to "Automatic Linkage with Applications"
(page 194).