How to Perform a Scan (for Windows users)
52

■Finishing ScanSnap Operation

Exiting ScanSnap Manager

Select [Exit] from the Right-Click Menu.
Normally, you do not have to exit ScanSnap Manager.

Disconnecting the ScanSnap

1. Close the ADF paper chute (cover) to turn off the ScanSnap.
DThe ScanSnap Manager icon on the taskbar changes from to .
2. Disconnect the USB cable from your computer.
3. Disconnect the power cable or the USB bus power cable from the AC
outlet or the computer.
You cannot use the ScanSnap after exiting ScanSnap Manager.
Select [Start] menu J [All Programs] J [ScanSnap Manager] J [ScanSnap Manager] to
start up ScanSnap Manager when you want to use the ScanSnap.
The ScanSnap is turned on/off in conjunction with the computer or opening/closing of the
ADF paper chute (cover). Therefore, you do not have to worry about turning the power
on/off as long as the ScanSnap is connected to a computer.