2.2 Connecting ScanSnap to your Computer
2.2Connecting ScanSnap to your Computer
Follow the procedure below to connect ScanSnap to your computer.
1.Connect ScanSnap to a power outlet with the AC cable.
2.Connect ScanSnap to your computer with the USB cable.
•Be sure to connect the AC cable before connecting the USB cable.
ATTENTION
• Be sure to install ScanSnap Manager before connecting ScanSnap to your computer. [For details about the installation, refer to "Installing ScanSnap" (page 6)].
The following describes each of the
■Connecting the AC Adapter
Connect the power cable as shown below.
1. Connect the AC cable to the AC adapter.
| AC cable | AC adapter |
|
| |
ATTENTION | Do not use cables other than those supplied with this product. | |
| Use the only specified AC cable and AC adapter. | |
2
ScanSnap Connecting
2.Plug the AC adapter to the AC adapter connector on the back of ScanSnap and the other end to a power outlet as shown in the figure.
Outlet
AC adapter connector
ScanSnap S500M Operator's Guide |
| 17 |
|