2.2 Connecting ScanSnap to your Computer
3. Open the paper chute of ScanSnap.
Paper chute
[POWER] button
Power lamp
⇒ScanSnap is automatically turned on and detected by your computer.
ATTENTION | If the scanner is not automatically turned on (Blue Power lamp is ON), push the |
| [POWER] button on the scanner. |
ATTENTION | It may take some time for the "ScanSnap Manager" icon in the Dock to become |
.
If you have waited for some time, and it still remains as 
, turn off the power using the scanner [POWER] button and turn on the power again.
2
ScanSnap Connecting
HINT
HINT
When you turn off/on the scanner, press the [POWER] button for longer than one second.
*To prevent an accidemtal shut down, the [POWER] button does not work unless it is pressed for longer than one second.
The scanner can be turned on/off by performing the following actions:
•Opening/closing the paper chute cover on the scanner,
•Turning on/off the computer,
•Pressing the [POWER] button on the scanner (when the paper chute cover is
opened).
Opening/closing the paper chute cover takes precedence. For example, the scanner will not be turned on even when you have switched on your computer if the paper chute cover is closed.
Generally, you can turn on/off the scanner by just opening/closing the paper chute cover when the scanner is connected to your computer.
ScanSnap S500M Operator's Guide |
| 19 |
|