Fujitsu S500M ■Scanning documents

■Scanning documents

Operation

1. Make sure that the "ScanSnap Manager" icon is displayed in the Dock menu.

HINT

If the "ScanSnap Manager" icon is not displayed, from Finder, select the destination in which "ScanSnap" is installed (generally, you select "Applications," and then "ScanSnap"), and select "ScanSnap Manager" to start up "ScanSnap Manager."

The icon has been added to the Startup Item on the Mac operating system during installation, and therefore it appears in the Dock menu when the Mac OS starts.

If "ScanSnap Manager" has not been added to the Startup Item in the [System Preferences] window, follow the procedure below to add it.

1.If the operating system you are using is Mac OS X v10.2, in the "System Pref- erences" window, select "Login Options" - "Add," and then add "ScanSnap Manager" again.

2.If the operating system you are using is Mac OS X v10.3 or v10.4, in the "Sys- tem Preferences" window, select "Accounts" - "My Account" - "Login Items (for Mac OS X v10.4)" or "Startup Items (for Mac OS X v10.3)," and then select "+" to add "ScanSnap Manager."

2. Load the document onto the scanner.

Refer to "3.2 Scanning Different Document Types" (page 29) and "3.3 Loading Documents" (page 31).

3.Press ([SCAN] button).

⇒This starts the scanning.

HINT

•By default, documents are scanned in "Duplex scan" mode when you press the [SCAN] button. With "ScanSnap Manager," you can change the mode to "Simplex scan" mode.

•You can also start the scanning by using the ScanSnap Manager icon in the Dock menu to select "Simplex" or "Duplex" scan.

Refer to "3.4 Changing Scan Settings" (page 34) for more details.

24