Fujitsu ST4000P manual Status Display, Icon Mode/State LED State Remarks

S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n O n e

STATUS DISPLAY

Icons appear in the Status display indicating the status of system functions such as system power and battery charge level. The location of icons in the Status display is shown in Figure 1-7.

Table 1-2 explains how individual icons are displayed, and describes what the variations of that display indi- cate. (If an icon is not displayed, it indicates that the related system function is off or inactive.

Power

Charge/DC In

Battery

HDD Access

Hovering Mode

Figure 1-7 Status Display Icons

In the following table, a “blinking” LED flashes at the rate of once per second; an LED that is “blinking, slow” flashes at the rate of one second on, five seconds off.

Icon		Mode/State	LED State	Remarks
Power	•	On State	Green, continuous	The system is powered on and ready for use.
	•	Idle Mode
	•	Suspend-to-RAM	Green, blinking	The system has suspended and saved active
				settings to RAM.
	•	Off State	Off	The system has suspended and saved settings
	•	Hibernate		and data to the hard disk drive.
		(Save-to-Disk)
Charge/	•	On State	Amber	AC adapter and battery are available and system
DC In	•	Idle Mode		is charging.
			Green	• AC adapter and battery are available and
	• Suspend-to-RAM
				system is not charging (battery fully
	•	Hibernate		charged).
		(Save-to-Disk)		• AC adapter is available but battery is not
	•	Off State		present.
			Amber, blinking	AC adapter and battery are available and waiting
				to charge (battery is out of thermal range).
			Off	AC adapter is not available.

8