Fujitsu ST4000P Connectors and Peripheral Interfaces, Connector Pen Tablet Purpose Peripheral

S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n O n e

CONNECTORS AND PERIPHERAL INTERFACES

Connectors and peripheral interfaces on the Stylistic ST4000P Series pen tablet PC allow connection of a variety of devices. Specific locations are illustrated in Figures 1-2 through 1-5.

Table 1-6 provides a description of each peripheral connector on the Stylistic ST4000P Series pen tablet PC. Each of the illustrated icons is either molded into or printed on the pen tablet PC case.

Connector/	Pen Tablet	Purpose
Peripheral	PC Icon
DC in		Connect an external power source such as the AC adapter or auto/
connector		airline adapter.
USB Port		Connect Universal Serial Bus 1.1 compliant devices to the pen tablet PC.
PCMCIA		Install a Type I or Type II PC Card.
Card slot
Microphone		Connect an external microphone. The internal microphone is disabled
jack		when you plug in an external microphone.
Headphone		Connect stereo headphones or powered external speakers. The internal
jack		speaker is disabled when you plug in external headphones or powered
		speakers.
IrDA/FIR port		An infrared transceiver built into the pen tablet PC allows you to
		communicate with other devices that are compliant with the IrDA
		Standard Rev. 1.1. Effective range for infrared communication is about

3feet, and within 15 degrees off center. A clear line-of-sight path must exist between the IrDA port on the pen tablet PC and the IrDA transceiver on the other device.

Modem	Connect a telephone line to the optional internal modem using a
	standard RJ-11 telephone plug.
Tablet Dock	Connect the Stylistic ST4000P Series dock or other approved docking
port	device. Refer to documentation accompanying the docking device for
	more information.
Infrared	An infrared receiver built into the pen tablet PC allows you to
keyboard/	communicate with a wireless infrared keyboard or mouse. The keyboard
mouse port	infrared port works optimally between 10 to 30 cm (approximately 4 in.
	to 12 in.) from the keyboard infrared port, located on the bottom edge
	of the pen tablet PC. Ensure that there is a clear line-of-sight path
	between the infrared receiver on the pen tablet PC and the infrared
	transmitter on the keyboard or mouse.
KensingtonTM	The Kensington MicrosaverTM security slot allows you to secure the pen
Lock slot	tablet PC using Kensington-compatible locking devices.

14