Fujitsu ST4000P manual Powering UP the PEN Tablet PC, Shutting Down the System

S t y l i s t i c S T 4 0 0 0 P S e r i e s U s e r ’ s G u i d e – S e c t i o n T w o

Icon Appearance	Current State	To Change State*
Power icon	On State	To enter the Off state, shut down the system using the Start menu on your
	or	system.
displayed	Idle State
		To enter Suspend-to-RAM or Hibernate (Save-to-Disk)†state, suspend system
continuously
		operation using either a hardware or software suspend.
Power icon blinking	Suspend-to-	To enter the On state, resume system operation by pressing the Suspend/
	RAM†	Resume button.
		To enter the Off state, resume system by pressing the Suspend/Resume
		button, then shut down your system.
Power icon not	Off State, or,	To enter the On state, start your system, or resume system operation by
displayed	Hibernate	pressing the Suspend/Resume button.
	(Save-to-Disk†)

Table 2-1 Changing System States

*Information in Table 2-1 on page 20 is supplied to help you understand which system states your system can enter from the current system state. Refer to the procedures on starting the system, shutting down the system, suspending system operation, and resuming system operation given later in this chapter.

†Your system may be configured to use either Suspend-to-RAM mode or Hibernate mode.

POWERING UP THE PEN TABLET PC

Follow the procedure below to start the Stylistic ST4000P Series pen tablet PC. Before you begin, confirm that the system is in the Off state. To do so, observe the Status display. If the Power icon is not visible in the Status display, the system is in Off state or in Hibernate (Save-to-Disk) mode and it is safe to perform this proce- dure. If the Power icon is visible (either blinking or on continuously), do not perform this procedure. See “System States” earlier in this chapter for details on modes represented by the Power icon.

1.Ensure that the battery in your pen tablet PC is sufficiently charged, or connect an external power source such as the AC adapter or auto adapter to your pen tablet PC.

2.Press the Power On/Suspend/Resume button to start the system.

After performing initialization, the system starts the operating system installed on the hard disk drive. Once the operating system is running, you can use the system.

SHUTTING DOWN THE SYSTEM

Follow these steps to shut down and turn off your system:

1.If system operation has been suspended, resume system operation. See “Resuming System Opera- tion” later in this chapter for details.

2.Save your work and close all running programs.

3.Choose Shut Down from the Windows (2000 Profes- sional or XP Professional) Start menu.

4.Carry out the Shut Down command.

The system is now in the Off state.

SUSPENDING SYSTEM OPERATION

The pen tablet PC allows you to suspend the system operation without closing programs or exiting the oper- ating system. Use this feature to conserve battery power when a system shutdown is not practical or when the battery needs to be changed.

P O I N T

If you have set your system to turn power off from the Power Options utility in the Control Panel, the following procedure will not be possible, since pressing the button shuts the system down rather than suspending it. To change your power options, go to Start -> Settings -> Control Panel -> Power Options.

20