Pen Tablet PC is Not Responding to the Pen | Fujitsu ST4000P

C a r e a n d M a i n t e n a n c e

IrDA port on the other device? A direct line-of-sight path must exist between the IrDA port on the pen tablet PC and the IrDA port on the other device.

•The distance between the two devices must not be more than 3 feet.

•The viewing angle from the IrDA port on the pen tablet PC must not be more than 15 degrees from a center line between the IrDA port on the pen tablet PC and the IrDA port on the other device.

•The device with which you are trying to communicate must be compliant with the IrDA Standard Revision 1.1 (or 1.0).

•It may be necessary for both computers to be using the same network connection protocols.

Pen Tablet PC is Not Responding to the Pen

If the pen tablet PC does not respond to the pen, connect an external keyboard to the system to see if it responds to keyboard commands. If the system doesn’t respond to a keyboard, the application or system may have crashed, and it may be necessary to reset the system. If the system responds to a keyboard but not to a pen, contact your local help desk or reseller for further assistance.

Speaker/Headphone Volume Too Low

If the audio volume on your pen tablet PC speaker or external headphones is too low, check the following:

•Ensure that the speaker (or headphone output if using headphones) is enabled. To do so, open the Control Panel and double-click on the Sounds and Audio Devices icon. Select the proper tab, and increase the volume using the slider bar. (If you aren’t getting any sound, uncheck the Mute box if it is checked.)

•Press the Fn button twice to open the Fujitsu menu. Volume can be adjusted from the menu.

•Ensure that the mute box in the system volume control (accessible from the system tray) is not set.

•Ensure that any volume control in your audio software is set to an audible level.

Configuring Peripheral Interfaces

Certain peripheral devices can be disabled during the BIOS Setup. If the peripheral interface you want to use does not appear to be working with your peripheral device, ensure that it is enabled in the BIOS. Contact your local help desk or reseller if you need assistance using BIOS Setup.

31

Image 41

Fujitsu ST4000P manual Pen Tablet PC is Not Responding to the Pen, Speaker/Headphone Volume Too Low

Contents

Fujitsu PC Corporation According to FCC PartPage Table of Contents Page Preface Page Fujitsu Contact Information Warranty InformationAbout this Guide Page Getting Started with Your Pen Tablet PC Page IN-BOX Items for the Stylistic ST4000P Series PEN Tablet PC Getting Started with Your Stylistic Pen Tablet PC Optional Accessories Front Features Stylistic PEN Tablet PC Features Back Features Top Features Left-Side Features Right-Side Features Icon Mode/State LED State Remarks Status Display Mode Access Application Buttons Tablet Button SettingsTablet Icon Description Application Buttons Primary and Secondary Functions Navigation Buttons Tertiary Functions of Application and Navigation Buttons Connector Pen Tablet Purpose Peripheral Connectors and Peripheral Interfaces Peripheral Connectors/Interfaces Page Using Your Stylistic ST4000P Series Pen Tablet PC Page System States Using the Stylistic ST4000P Series Pen Tablet PC Shutting Down the System Powering UP the PEN Tablet PCSuspending System Operation Current State To Change State U T I O N Power icon is blinking Suspend-to-RAMmodePower icon is not displayed Hibernate mode Installing a PEN Tether Using the PENResuming System Operation U T I O N S Charging the Battery Using Hovering ModeCalibrating the PEN To Calibrate the Pen I N T Removing and Installing BatteryTips for Conserving Battery Power PC Card Slot Removing and Installing Memory ModulesModem Connection Removing a Memory Module Installing a Memory Module Care and Maintenance Page Protecting the Display Screen Care and Maintenance Troubleshooting Cleaning the Display ScreenStoring the PEN Tablet PC Avoiding Overheating Pen Tablet PC is Not Responding to the Pen Speaker/Headphone Volume Too LowConfiguring Peripheral Interfaces Page Specifications Page Physical Specifications Stylistic ST4000P SpecificationsProcessing Specifications Memory/Storage Specifications Environmental Specifications Power SpecificationsAgency Approval Specifications Additional Specifications Agency Notices Page FCC Registration Number Regulatory Information E R T I S S E M E N T Avis Aux Utilisateurs Du Réseau Téléphonique Canadien For Authorized Repair Technicians Only UL NoticeR N I N G S System DisposalPage Appendix Page Regulatory Notes and Statements FCC Regulatory InformationFederal Communications Commission statement FCC Interference Statement Characteristics of the Device Before Using this DeviceWireless LAN Modes Using this Device How to Handle This Device Setting Parameters Connecting Windows 2000 SystemsWhen you finish your entry, click Apply Workflow TCP/IP Settings Network SettingsEncryption Key Setup Network Connection Windows Sharing Setting File and Printer Sharing for Microsoft NetworksChecking the full computer name and workgroup Sharing Files Accessing Another ComputerPrinter Sharing Checking the Connection Checking connectivity Connecting Windows XP Systems On Wireless Network Connection Properties, click General Network SettingsNetwork Connection Click OK Sharing Setting computer name and workgroup Transfer data for send Tx and receive Troubleshooting Table Windows XP Click Start All Programs Accessories Windows 2000 Click Start Programs AccessoriesYou want to store the IP address Click Enter, then go to the location you specified above. Windows Problem Possible Cause Setting IP Addresses Problem Possible Cause Possible SolutionAbout IP Addresses Windows XP Technical Specifications for Integrated Wireless LAN Device SpecificationsPage Battery power Battery gauge Battery gauge icon Battery icon Battery packBattery release button Battery release latch External Monitor Connector Power On/Suspend/Resume Button Power usage Peripheral connectorsOverheating, avoiding Save-to-Disk mode Solving problems Speaker Speaker/headphone volume too low System interface connector Stylistic ST4000P SpecificationsWireless LAN module Wireless LAN On/Off switch Network Connection Y l i s t i c S T 4 0 0 0 P S e r i e s