Fujitsu Stylistic ST4000P Specifications, Physical Specifications, Processing Specifications

S y s t e m S p e c i f i c a t i o n s

Stylistic ST4000P Series Hardware Specifications

The following table provides general hardware specifications of the Stylistic ST4000P Series pen tablet PC by category.

	Stylistic ST4000P Specifications
		Physical Specifications
Dimensions		11.86” w x 8.66” d x 0.82”-0.88” h
		(301.3mm x 220mm x 20.9-22.3mm)
Weight		3.2 lbs. (1.45 Kg)
		Processing Specifications
CPU		Ultra low voltage Mobile Intel Pentium
		III processor - M with SpeedStep
		technology*
Chip set		Intel 830MG - 133 MHz
Processor		800 MHz*
Speed
	Memory/Storage Specifications
Main RAM		• 256MB SDRAM (on-board/
			PC133).
		•	144-pin SO DIMM modules
		256MB and 512MB module
		configurations available, with a system
		maximum of 768MB.
L1 cache		32 KB on-die
(CPU)
L2 cache		512 KB on-die
BIOS ROM		8 Mbit (FWH)
Hard disk		•	2.5” HDD
drive		•	Minimum 20GB IDE HDD*
		•	Ultra DMA 100
		•	Shock-mounted

Stylistic ST4000P Specifications (Continued)

Display Specifications

Display	•	Color LCD
	•	Passive Touch Panel
	•	16-bit color
	• 10.4” TFT XGA (1024 x 768), 260K
		colors
	•	Brightness: 8 levels
	•	Viewing Angle:
		Horizontal: 30 degrees (min.)
		Vertical: 10 degrees (min.)
	•	Contrast Ratio:
		Typ. 250, Min. 100
VRAM	Intel 830MG chipset with 8MB shared
	memory using Unified Memory
	Architecture (UMA) delivers low-
	power, high-performance 3D/2D
	graphics, video, and display capabilities.
	Dynamic Video Memory Technology
	(DVMT) dynamically responds to
	application requirements and efficiently
	allocates the proper amount of memory
	(48MB max.) for optimal graphics and
	system performance.
	Interface Specifications
PC Card	•	One Type I or Type II
Slots	•	PCMCIA CardBus version 3.0
Integrated	•	Modem (RJ-11)
Interfaces	•	LAN (RJ-45)
	• IEEE 1394 (S400 4-pin)
	•	USB (Qty. 2)
	•	DC-In
	• 15-pin D-SUB connector for
		external VGA monitor
	•	Docking connector
Infrared	IrDA version 1.1 (FIR, 4Mbps)

35