Fujitsu manual 1-2 XG1200 Components, XG1200 front, Before Use

1-2XG1200 Components

This section explains the names and functions of the various XG1200 components, including the various indicator LEDs.

XG1200 front

The following explains the names and functions of the components at the front of the XG1200.

Alarm LED				Link/Act LED			Link/Act LED
Power LED	Status LED									Front Fan Unit
Dump Switch		Port 9		Port 10 Port 11 Port 12
Serial Port	Tx		Rx	Tx	Rx	Tx	Rx	Tx	Rx
Console RS-232
Dump Power Alarm Status	Tx		Rx	Tx	Rx	Tx	Rx	Tx	Rx
										Link/Act
Mng-LAN										FAN
	Tx		Rx	Tx	Rx	Tx	Rx	Tx	Rx	Link/Act
	Port 5			Port 6		Port 7			Port 8
	Port 1		Port 2			Port 3		Port 4		Front Fan LED
Mng-LAN
Mng-LAN Speed LED	Link/Act LED				Link/Act LED				Link/Act LED
Mng-LAN Link LED

•	Power LED (Green)	Lights when the XG1200 is receiving power.
•	Alarm LED (Orange)	Lights when there is a problem with the XG1200.
•	Status LED (Green)	Lights when the XG1200 is in an operable state.
•	Serial Port	Used when performing maintenance or adjusting the settings
		(Console connection).
•	Mng-LAN	Used when performing maintenance or adjusting the settings
		(LAN connection).
	- Mng - LAN Speed LED (Orange)		Lights if the link is 100BASE-TX.
	- Mng - LAN Link LED (Green)		Lights when the link is established.
•	Ports 1-12	Xenpak modules which connect to the IEEE802.3ae/ak com-
		pliant 10 Gigabit network served by the XG1200. Connection
		method varies depending on which Xenpak modules are
		installed.
•	Link/Act LEDs (Green)	Displays the condition of respective port.
		Each LED lights when a link is established on its port.
•	Front Fan Unit	Cooling air intake fan.
•	Front Fan LED (Orange)	Lights when there is a problem with the Front Fan Unit.
•	Dump Switch	Used to collect maintenance information.

CAUTION

In order to avoid having negative effect on the cooling of the XG1200, do not loosen the Front Fan Unit screws on purpose.

14

Before Use