Fujitsu manual not used properly, For Safe Use of the XG1200

WARNING		This symbol indicates the possibility of serious or fatal injury if the XG1200 is
		not used properly.
		For your safety and that of others, please follow these guidelines.
Category		Warning
Danger of	Never attempt to disassemble, dismantle, upgrade, or recycle the XG1200 by yourself.
electric shock	Do not place objects on the XG1200, as there is a risk of electric shock, fire, and/or damage.
or fire
	Do not install the XG1200 where it will be exposed to direct sunlight, close to a heating device, or in an
	environment with much dust and high humidity, as there is a risk of electric shock and fire.
	For XG1200 models with cooling vents, do not block off the vents as these prevent the internal parts of the
	XG1200 from reaching high temperature, and there is a risk of fire.
	Do not wrap the running XG1200 with a cloth. Doing so keeps the heat in, and may cause a fire.
	Avoid getting any liquids (such as coffee) or pieces of metal (such as paper clips) into the XG1200, as there is
	a risk of electric shock and fire. To avoid foreign objects getting into the XG1200, never place objects on it.
	Do not put your fingers into the LAN jack, as there is a risk of electric shock.
	Do not use the XG1200 with any voltage other than that specified on the device, as there is a risk of electric
	shock and fire.
	Should the XG1200 start giving off heat, smoke, and/or a strange smell, immediately disconnect the power
	plug from the power outlet. To make this easy, the XG1200 should be located close to the power outlet (wall
	socket or power strip), and the power outlet must be readily accessible.
	Do not disconnect the ground cables before disconnecting the power plug from the power outlet.
	After the power is disconnected, contact the vendor's service department immediately. Continued use of the
	XG1200 may cause an electric shock and fire.
	Note that in this case, the state of data in transmission is not guaranteed. (page 32)
	If the power plug or power socket is dirty, clean it with a dry cloth. Continued use may cause a fire. (page 30)
	Do not touch the power plug with wet hands, as there is a risk of electric shock. (page 30)
	Insert the power plug completely into the power socket.
	A partially inserted power plug may cause an electric shock, give off smoke, and/or catch fire. (page 30)
	When you remove a power plug from its outlet, be sure to pull the only power plug itself. Pulling on the power
	cord itself may expose the cores or break the cord, and cause electric shock or fire. (page 30)
	If the XG1200 is to be left unused for any significant period, remove the power plug from the outlet for safety
	reasons. Failure to do so may cause a fire or damage. (page 30)
	Do not damage or remodel the power cords, as this may cause electric shock or fire.
	Do not place any object on, wrap any object with, pull and/or kick the power cords, as there is a risk of
	electric shock and fire. (page 30)
	Never overload a power outlet with multiple devices.
	If too many devices are connected, the power socket may overheat and cause a fire.
	When you remove a power plug from an outlet, be sure to pull the power plug itself.
	A power plug damaged by incorrect removal may cause an electric shock and fire.
	Do not use the XG1200 with a damaged power cord, a damaged power plug, and/or a loose socket.
	Continued use under these conditions may cause an electric shock and fire. (page 30)
	Do not bundle the power cords. Doing so increases the heat density, and may cause a fire.
	Do not touch the power plug when there is thunder and lightning about, as there is a risk of electric shock.
	(page 30)
Danger of	Do not place the XG1200 on its side or stack up multiple XG1200s.
breakage	Ignoring this may damage the XG1200 or injure the operator.
and injury
	Do not install the XG1200 in an unstable place (such as on a slanted surface or a place subject to vibra-
	tions).
	Doing so may cause injury or device damage.
	Do not place any objects or perform any work on the XG1200.
	Ignoring this may damage the XG1200 or injure the operator.
	Never leave the plastic bags the XG1200 was packed in around where children can find them, as they may
	suck them into their mouths or place them over their heads in fun, with a severe risk of choking and asphyxia.
	Do not dispose the XG1200 with other wastes. If burnt, the XG1200 can explode.

For Safe Use of the XG1200

3