Fujitsu manual Fix the four rack mounting brackets to the XG1200, Installation Procedure

3. Fix the four rack mounting brackets to the XG1200.

Each of the four rack mounting brackets (left, right, back-left, back-right) has three holes that should line up with matching holes on the sides of the XG1200, as shown in the diagram. Attach each rack mounting bracket using the countersunk bracket screws provided.

	Bracket	Rack Mounting Bracket BL
	Screws
Rack Mounting Bracket L		2
	Bracket
Bracket	Screw
Screws
		Rack Mounting Bracket BR
		Bracket
		Screws
		Bracket
		Screw
		Rack Mounting Bracket R
		Bracket
		Screws

4. Slide the XG1200 into the rack and fasten it in place.

Insert the XG1200 into the rack and line up the back rack mounting brackets with the already attached rails. Do not let go of the XG1200 until the rack screws (large) have been fastened to the previously installed rack/cage nuts. The rack screws (small) may then be used to fas- ten the back rack mounting brackets to the rails.

Securely tighten all the screws with a screwdriver.

Rack Screws (Small)

Rack Screws (Small)

Rack Screws (Large)

Rack Screws (Large)

Installation Procedure

27