Invoking an SVP frame | Standard processing in SVP mode |
The password entry window is displayed:
Figure 9: SVPST0 #1 window (password entry)
Ê Enter the password for the specified user ID and press ENTER .
If the correct password has been entered, the following window appears after a short pause:
–after starting the S130: the MODE SELECTION FRAME (see page 47)
–after closing and reopening the “SVPST0 #1” window or
opening another SVP window on the secondary console: the last frame shown in the “SVPST0 #1” window.
! | If the “SVPST0 #1” window or another SVP window on the secondary console is |
opened, the contents of the window are not output completely. Press the K2 key. | |
| This causes the screen to be refreshed, i.e. the frame that was last output is |
| displayed again in its entirety. |
36 |
