Fujitsu Siemens Computers BS2000/OSD manual Parms =, MT Control = IPL from tape

User frames				Standard processing in SVP mode
				If IPL is terminated normally, the device address list
				is transferred from the PRESET GROUP to the
				CURRENT GROUP.
				If the IPL is unsuccessful, the next device address
				from the PRESET GROUP is reloaded. If this
				loading is terminated normally, this device address
				heads the CURRENT GROUP.
2	CURRENT GROUP			The first device address in this column is the device
				from which the last IPL was executed.
				If the loading from this device is unsuccessful, the
				IPL is repeated with the next device address. If it is
				terminated normally, this address then heads the
				CURRENT GROUP.
3	UNIT ADDRESS			A new device address from which the operating
				system is to be loaded can be entered here. If the
				IPL is terminated normally, this device address is
				put in first position of the CURRENT GROUP.
				If the IPL is unsuccessful, the loading is not
				repeated.
PARMS =>		A maximum of 8 characters can be entered in this field. Their position
		and meaning are listed below:
Position 1		Ë	load BS2000
		1	load VM2000
Position 2 - 5		mn mnemonic for Write/Read console,
			if C2C3 is not generated by default.
Position 6 - 7			not used
Position 8		Ë	no function
		1	automatic restart function
MT CONTROL => IPL from tape:
1	NL			from current tape position
2	SL			skip label then load
3	NL-REWIND			rewind then load
4	SL-REWIND			rewind, skip label then load

52 U25339-J-Z126-1-7600