Fujitsu Siemens Computers BS2000/OSD manual Using frames, SVP function keys

Using frames Standard processing in SVP mode

6.3 Using frames

You assign a job to the SVP by invoking the relevant frame, selecting the desired function, and specifying the required parameters. To select a function or specify a parameter, you must enter the alphanumeric characters shown in the frame in the input fields marked by an arrow (=>). The input fields can be selected with the tab key . Once you have entered all the functions and parameters assigned to a job, press the ENTER key. In several frames, functions can also be initiated with the SVP function keys.

Instead of selecting a function, you can also enter a command in the command input line in all frames (screen line 24) and assign a job to the SVP in this way. Frames can also be selected using the FRËFrame-ID, e.g. FR ML (to switch to the MODE SELECTION FRAME). A command entered in line 24 takes priority over a selected frame function.

General notes on frame operation:

The input is disturbed by the output of messages in line 23 (e.g. SET TIME COMMAND COMPLETED). The K1 key suppresses output of the message for one minute. In this time the frame can be filled out and dispatched with ENTER .

6.3.1 SVP function keys

i

An EMDS keyboard mask, which must be ordered separately, is used to operate the SVP frames:

Order number: U20076-J-Z148-1

EMDS (SINIX Open Desktop) as of V2.1 for DSS 97801-5xx:

Keyboard masks - 6 strips

The following diagram shows the position and labelling of the SVP function keys on the EMDS keyboard mask:

P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 F1 F2 F3

P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 K1 K2 K3

You can activate various functions on the SVP frames with the help of the P keys P1 to P20 , the keys K1 to K3 and F1 to F3 .

42 U25339-J-Z126-1-7600