FUNAI LD195EMX owner manual 5Channel List 5Manual Register, Using CH K/L, Enter

Español Français English

5Channel List	5Manual Register
The channels selected here can be skipped when selecting the channels	This function lets you add the channels that were not added by
using [CH K/L].	the autoscan due to the receptible condition at the initial setting.
Those channels can still be selected with [the Number buttons].

INTRODUCTION

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL”, then press [ENTER].

or

3Use [Cursor K/L] to select “Channel List”, then press [ENTER].

or	Channell
	Autoscan
	Channel List
	Manual Register
	Antenna

4Use [Cursor K/L] to select the channel you want to remove, then press [ENTER].

or	Channell Listi
	Highlight channels for Ch
		DTV	6
	Up/Down key selection.		27
		DTV	8
			9
		DTV	48

58

DTV 67

BACK

Ch Select ENTER Watch/Skip Back

•The channel display for the removed channel darkens. You will not be able to select the channel again using [CH K/L].

•To reactivate a removed channel, use [Cursor K/L] and press [ENTER]. The registered channels are highlighted.

•When you remove a main channel, its subchannels are removed as well.

Note:

•The channel with the “DTV” indicated on the display is ATSC. Otherwise the channel is NTSC.

5Press [SETUP] to exit.

1 Press [SETUP] to display the main menu.			PREPARATION
2 Use [Cursor K/L] to select “CHANNEL”, then press
[ENTER].			WATCHING
or
			TV
3 Use [Cursor K/L] to select “Manual Register”, then			OPTIONAL
			SETTING
press [ENTER].
or	Channell		OPERATING
	Autoscan
	Channel List
	Manual Register
	Antenna
			DVD
4 Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].			DVD
		11	SETTING
	Manuall Registeri
	For analog channels, select a	Register
	channel to register using number
	keys.		TROUBLESHOOTING
	For digital channels, you must
	perform Autoscan function.
	Ch Change	BACK
		Back
5 Press [SETUP] to exit.
• If setup completes successfully,			INFORMATION
Note:
“Added to the channel list” is displayed.
• If external input is used, it is not possible to register the
channel and “Unavailable” will be displayed on the TV
screen.
• By using [CH K / L], you can select the memorized
channels only.

21

EN