Furuno FR-2115/2125 manual Separate type control head, Necessary parts RP-26-Z-2E Code no

10.Fasten the front panel on the display pedestal.

11.Retract the stay to close the display unit. 12.Fasten the right arm cover.

Separate type control head

Necessary parts: RP-26-Z-2E (Code no. 008-491-400)

Name	Type	Qty	Code No.
Card Case Assy.	–	1	–
RP Board	14P0298	1	008-487-640
Pan Head Screw B	M4x8 C2700W	1	000-881-445
Pan Head Screw B	M3x8 C2700W	2	000-881-404
Pan Head Screw A	M2.6x5 C2700W	2	000-800-973

1.Lift the monitor. See Chapter 1 for instructions.

2.Fasten the mounting base with one M4 x 8 screw as below.

Fasten with

M4 x 8 screws.

Fasten with M3 x 8 screws (2 pcs.)

Figure 4-12 Display unit, inside view

3.Fix the mounting base to front panel with two M3 x 8 screws.

4.Set the M-card case lid to the hole in the front panel and fix with two M2.6 x 5 screws.

4-12