Furuno FR-2115/2125 manual Performance Monitor PM-30, Necessary parts PM-30 and OP03-150 Code no

10.Fasten the front panel of the display pedestal.

11. Fasten the ground wire to the location shown in Figure 4-14. 12.Close the monitor.

4.4Performance Monitor PM-30

Necessary parts: PM-30 and OP03-150 (Code no. 008-485-490)

Name	Type	Qty	Code No.
PM Board	03P9225	1	008-487-620
Pan Head Screw	M3x8 C2700W	3	000-881-404
Connector Assy.	VH3P-L300-AA	2	000-141-014

1.Lift the monitor. See Chapter 1 for instructions.

2.Fasten the PM Board 03P9225 to the location shown below with three screws (M3 x 8).

J403

PM Board 03P9225

J401

J411J402

Figure 4-15 Display unit, inside view

3.Connect the connector P401 coming from J411 to J401 on the PM Board.

4.Connect two connector assemblies (VH3P-L300-AA) to J402 and J403.

5.Solder the other end of there connector assemblies with external cables, one from ship’s mains and one from the PM-30.

6.Close the monitor.

4-14