Furuno FR-7112, FR-7252, FR-7062 Basic Menu Operation, Index Lines, Turning the index lines on/off

3. ADVANCED OPERATION

3.1 Basic Menu Operation

The menu mostly contains less-often used func- tions which once preset do not require regular adjustment. To open or close the menu, press the [MENU] key. You can select items on the menu with the trackball. The complete menu appears at begining of this manual.

1.Press the [MENU] key to display the main menu.

	SSel by T-ball & press ENT.S
RINGS	INDEX	DISP	INT
	LINE	DATA	REJECT
Change brill		ARP-10	OTHER
from 3 to max.		MENU	MENU

Figure 3-1 Main menu

2.Operate the trackball to select the item. For example, select RINGS. A message appears at the bottom of the menu window.

3.Press the [ACQ/ENTER] key to select set- ting. Each time this key is pressed, the message changes. For the RINGS menu, the message sequence is as shown below.

Change brill from Off to 1.

Change brill from 1 to 2.

Change brill from 2 to 3.

Change brill from 3 to max.

Change brill from max to Off.

Figure 3-2 Messages for RINGS menu

4. Press the [MENU] key to close the menu.

3.2 Index Lines

The index lines are useful for maintaining a constant distance between own ship and a coast- line or partner ship. They are linked with EBL2 and VRM2.

EBL2

Index lines

Figure 3-3 Index lines

Turning the index lines on/off

1.Press the [MENU] key.

2.Select “INDEX LINE” by the trackball.

3.Select “Index Line on” by pressing the [ACQ/ENTER] key.

4.Press the [ACQ/ENTER] key to confirm.

5.Press the [MENU] key to close the menu.

“PI” indication appears next to EBL at the left bottom corner of the screen.

To turn the index lines off, select “Index Line off” and press the [ACQ/ENTER] key.

Rotating the index lines

1.Press the [EBL 2] key to activate EBL2.

2.Operate the trackball.

Adjusting the index lines interval

1.Press the [VRM 2] key to activate VRM2.

2.Operate the trackball.

3-1