DANGER
Before turning on the radar make sure no one is near the scanner unit.
Prevent the potential risk of someone begin struck by the rotating antenna and exposure to RF radiation hazard.
WARNING
Use the proper fuse.
Fuse rating is shown in the chapter 5.
Use of a wrong fuse can result in equipment damage
Do not operate the equipment with wet hands.
Electrical shock can result.
WARNING
Do not open the equipment.
Improper handling can result in electrical shock. Only qualified personnel shold work inside the equipment.
Do not disassemble or modify the equipment.
Fire electrical shock or serious injury can result.
Turn off the power immediately if water leaks into the equipment or the equip- ment is emitting smoke or fire.
Continued use of the equipment can cause fire or electrical shock.
Do not place
Fire or electrical shock can result if a liquid spills into the equipment.
CAUTION
No one navigation device should ever be solely replied upon for the navigation of a vessel.
Always confirm position against all available aids to navigation, for safety of vessel and crew.
The guard alarm is a useful
Two warning labels are attached to the display unit and scanner unit. Do not remove these label. If labels are peeling off or are illegible, contact a FURUNO agent or dealer.
<Display Unit> | WARNING | |
To avoid electrical shock, do not | ||
Name: Warning Label (1) | ||
remove cover. No | ||
Type: | parts inside. |
Code no.:
<Scanner Unit>
Name: Radiation Warning Label
Type: 03-142-3201-0
Code no.: 100-266-890
WARNING
Radiation hazard. Only qualified personnel should work inside scanner. Confirm that TX has stopped before opening scanner.
ii
