![](/images/backgrounds/240053/bg27.png)
2-3
2.4 Adjusting Tone andBrilliance1. Press the TONE key. The tone and bril-
liance setting display appears.
TONE : 5
BRILL : 8
LOW HIGH
LOW HIGH
Figure 2-5 Tone and display brilliance
setting display
2. Operate t or s to adjust display tone.
3. Press ▲ or ▼ to adjust display brilliance.
Note: Tone or brilliance must be adjusted
within about 10 seconds after pressing the
TONE key or the display will be erased.
2.5 Plotter DisplaysThere are five types of plotter displays: plot-
ter, plotter/sounder, data, graphic and high-
way.
Selecting a plotter display
1. Press the PLTR key. The SELECT PLOT-
TER MODE screen appears.
SELECT PLOTTER MODE
PLTR: Sel ESC: Close
Plotter
Plotter/Sounder
Data
Graphic
Highway
Figure 2-6 Select plotter mode screen
2. Press the PLTR key again to select a plot-
ter mode. Each time the key is pressed
the mode changes in the following se-
quence:
Plotter Plotter/Sounder Data
Highway Graphic
You may also select a mode by pressing ▲
or ▼ and the ENT key.
3. Press the ESC key to conclude your se-
lection.
Sample plotter displays
Plotter display
The plotter display mainly shows chart, ship's
track, waypoints, marks and various data.
CSE 180.0° SPD 16.8kt 2D
DEP 110m TMP 16.0°C 12:13
POS 34°26.345’N 135°41.232’E
Position Water temperature
(Requires optional
sensor.)
Icon
(chart)
Course,
speed
Depth
Time
GPS status
Track
Own ship
mark
Course bar
Figure 2-7 Plotter display