7-5
4. Press the ENT key.
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
: Cursor
WAYPOINT LIST
No.
001
004
007
LAT/LONG COMMENT
123°00.000’E
23°00.000’N
10MAR97 01_ _
135°27.321’E
32°21.154’N
10MAR97 01_ _
132°21.321’E
30°19.721’N
10MAR97 01_ _
ENT: Sel
ROUTE LIST 01 LEG: _ _ _ . _ _ _ nm
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
_ _ _
: Page ESC: Esc
Figure 7-12 Route entry screen
5. Press the ENT key to enable entry of
waypoints.
6. Press or to select waypoint num-
ber.
7. Press the ENT key. The waypoint num-
ber selected appears at the top of the
screen and the cursor shifts to the next
column.
8. Repeat steps 6 and 7 to complete the route
and press the MENU key twice.
9. To set trial speed, the default setting of
which is 10 kts, press until TRIAL
TIME appears (after 20th route).
10. Enter speed with numeric keys.
11. Press the ENT key.
12. Press the MENU key.
7.6 Editing Routes
1. Press the MENU key.
2. Press the [4] key.
3. Press or to select route number.
4. Press the ENT key. You are asked if it is
alright to overwrite the contents of the
route.
Overwrite?
ENT: YES
ESC: NO
5. Press the ENT key.
6. Press t or s to select waypoint.
7. Press the ENT key.
8. Press or to select new waypoint.
9. Press the ENT key.
10. Press the ESC key three times to escape.
Note: If the waypoint is currently the desti-
nation, the following alert appears.
ROUTE IN USE
OVERWRITE?
ENT: YES
ESC: NO
7.7 Erasing Routes
1. Press the MENU key.
2. Press the [4] key. The route/route list ap-
pears.
3. Press or to select route number.
4. Press the CLR key.
ROUTE DELETE
ENT: YES
ESC: NO
ROUTE IN USE
DELETE?
ENT: YES
ESC: NO
When route is in use
5. Press the ENT key.
6. Press the MENU key.