Furuno GP-1610CF Changing Waypoint Mark Size, Entering Routes, Press or to select route number

Note: If the waypoint selected is part of a route you are asked whether it is alright to edit the waypoint.

ROUTE DELETE		ROUTE IN USE
		DELETE?
ENT: YES		ENT: YES
ESC: NO		ESC: NO
	When route is in use

7.Press the ENT key to register changes.

8.Press the MENU key to escape.

7.4Changing Waypoint Mark Size

Waypoint mark size can be selected to large or small.

Large Small

01×

Figure 7-9 Waypoint mark size

l.Press the MENU key.

2.Press the [l] key to show the DISPLAY SETUP menu.

DISPLAY SETUP

HUE		1	2
LAND BRILL		BRT	DIM OFF
LAND COLOR
		RED	YEL GRN BLU PPL WHT OFF
PLACE NAME
		RED	YEL GRN BLU PPL WHT OFF
GRID COLOR
		RED	YEL GRN BLU PPL WHT OFF
COURSE BAR
		RED	YEL GRN BLU PPL WHT OFF
TIME MARK
		RED	YEL GRN BLU PPL WHT OFF
WPT MARK SIZE
		L	S
CURSOR SIZE
		L	S
	: Cursor		ESC: Esc

Figure 7-10 Display setup menu

3.Operate the Cursor Pad to select WPT MARK SIZE.

4.Operate the Cursor Pad to Large or Small.

5.Press the MENU key to register selection.

7.5 Entering Routes

Often a trip from one place to another involves several course changes, requiring a series of route points (waypoints) which you navigate to, one after another. The sequence of waypoints leading to the ultimate destination is called a route. The GP-1610CF can auto- matically advance to the next waypoint on a route, so you do not have to change the desti- nation waypoint repeatedly.

You can store up to 20 routes. A route may consist of 30 points.

A route is constructed using waypoints, there- fore enter waypoints beforehand.

1.Press the MENU key.

2.Press the [4] key to display the route/route list.

ROUTE LIST

No.	PTS	TOTAL	TTG
	6
0 1		3 0 2 . 1 1 nm	4 1 : 3 6
0 2	4	2 0 1 . 2 7 nm	3 5 : 5 2

: Cursor	ENT: Sel
CLR : Delete Route	ESC: Esc
*: In Use

Figure 7-11 Route list

3. Press ▲ or ▼ to select route number.

7-4