PROBLEM | PROBABLE CAUSE | CORRECTIVE MEASURES |
4) Unusually high body fat estimates | a) Too much light present during the | a) Do not lift the Light Wand from the |
measurement. | subject’s biceps until a “2” appears on the | |
|
| screen during the first estimation or the |
|
| printer starts printing after the second |
|
| estimation. |
|
| b) Use the Light Shield to block the |
|
| external light. Always avoid |
|
| measurements under strong lights (e.g. |
|
| direct sunlight) because errors may occur. |
|
|
|
5) Printer Stops | a) Low batteries. | a) Replace batteries (see page 4). |
| b) Bad battery contact. | b) Remove batteries and clean tabs with |
| c) Bad AC connection. | isopropyl alcohol (rubbing alcohol). |
| c) Unplug the AC Adapter from the wall | |
|
| |
|
| socket and from the unit. Clean the |
|
| adapter contact with isopropyl alcohol |
|
| (rubbing alcohol). |
|
|
|
36
