download | |
G SPEED™eS PRO | Using the ATTO RAID Controller |
Download ATTO RAID Software
To use the ATTO R680 RAID controller, you first need to install drivers and software on your system. Visit www.g-technology.com/support/gspeed_es_pro/
Here you will find a special link to the ATTO website where you can download G- Technology approved drivers and software. You will also find the latest verison of this manual and easy configuration scripts for quickly setting up your G-SPEED eS Pro with the ATTO controller.
From the G-Technology page* on the ATTO website, please download the following items:
•Driver for your system
•ConfigTool utility
•ATTO R680 User Guide (optional)
*The software listed on the ATTO/G-Technology page has been tested and approved for use with G-SPEED eS Pro. Software listed on the standard download page on the ATTO website may not be compat- ible with G-SPEED eS Pro.
Install ATTO Driver & ConfigTool
G-SPEED eS Pro comes pre-configured for use with the ATTO R680 RAID controller. The drive is set up in RAID 0 and formatted for Mac OS X. Connecting G-SPEED eS Pro to your Mac Pro and configuring your system takes just a few steps as outlined below. (Windows users, please refer to the ATTO R680 User Guide.)
1.Locate the driver and ConfigTool downloaded from the ATTO/G-Technology page and install the driver, then ConfigTool.
2.The ATTO ConfigTool can notify you if problems oc- cur with the G-SPEED eS Pro. If you would like to use this feature, select ‘Full Installation’.
3.Shut down your system.
