Garland Convection Microwave Oven installation instructions Cooking Using The Product Keys Master

OPERATING INSTRUCTIONS Continued

NOTE: the controller will only accept cooking temperatures for the number of profiles for which a cooking time has been set. If the product key is pressed after the last programmed profile, the first temperature will be displayed.

•Press SET after the last cooking temperatures has been entered, HOLD will be displayed.

7.Use the START/CANCEl key to select yes or no. Press the SET key.

8.If yes was selected, the HOLD LED will light. Enter the hold temperature using the dial. (factory preset at 200°F) Press the SET key, FAN will be displayed and the FAN LED will light.

•Set the fan speed desired for the first cooking profile using the individual fan keys (HIGH, LOW or PULSE), press the product key and set the fan speed for the second cooking profile. Continue until all the profiles have been assigned a fan speed. Press the SET key when complete. As with the temperature, if the product key is pressed after the last programmed profile, the first fan speed will be displayed.

9.FL or ST will be displayed (for flex time or straight time) (factory preset for flex time). Select flex or straight time using the START/CANCEL key for the first profile. Press the product key and select straight time or flex time for the second profile. Continue until all the profiles have been assigned straight or flex time. Press the SET key when complete. If the product key is pressed after the last programmed profile, the first profile will be displayed.

10 Programming for that product key is complete.

Cooking Using The Product Keys (Master 475)

1.On initial start-up, press the product key for the menu item to be cooked. Wait until Load is displayed.

2.Load the oven.

3.Press the product key for the loaded menu item.

4.Press the START/CANCEL, key.

5.To cancel the alarm or the holding operation, press the START/CANCEL key followed by the product key.

Verifying Hold Time (Master 475)

While a product is being held, press and hold the product key. The actual hold time will be displayed.

Selecting Fahrenheit or Celsius (Master 475)

Press PROG and ACTUAL TEMP keys at the same time, F or C will be displayed. (factory preset for F)

Press the START/CANCEL key to switch between F and C.

When the desired setting is displayed press the PROG and ACTUAL TEMP keys at the same time.

Cooking With The Shelf Timer (Master 475)

The shelf timer option is used to independently time each of the up to six different shelves or racks within the oven.

NOTE: To use the shelf timer option, at least one product key must be programmed with a cooking profile (temperature, time, fan speed, flex or straight time). The program key must be limited to a single cooking profile to be used with the shelf timing option. If more than one product key is to be used, all product keys to be used must feature the same cooking temperature and fan speed. Flex or straight time and cooking time can be different. The Cook-N-Hold option can not be used with the shelf timer.

Pressing the desired product key will bring the oven to the desired cooking temperature, once the oven has reached the proper cooking temperature as indicated by Load in the display.

1.Press the product key containing the desired cooking profile (1-9).

Page 14 Part # 1955203 (12/06)