Garland Convection Microwave Oven installation instructions Controller Keys

OPERATING INSTRUCTIONS Continued

NOTE: If the oven temperature goes above the requested temperature the display will indicate “HI” If the oven temperature goes above °(°C) the display will indicate “HELP” and an audible signal will sound. This is a safety feature.

If the door is opened during a cooking mode, the fan and heat will stop, and the display will indicate “DOOR” until the door is closed. This is a patented safety feature.

Pressing the ACTUAL TEMP key will display the actual oven temperature in ° increments.

Controller Keys

Pressing the ON/OFF key will activate the oven.

Pressing the LIGHT key will turn the lights on for  seconds. The lights will work if the controller is in the Off mode. When the door is opened, the light will come on and stay on for  seconds.

Pressing the FAN HIGH key will activate the lower fan speed and light its LED.

Pressing the FAN LOW key will activate the lower fan speed and light its LED.

Pressing the FAN PULSE key will activate the lower fan speed and light its LED. The fan will be active for  seconds then off for  seconds, and continuous this cycle.

Pressing the SETBACK key will cool the oven cavity to a preprogrammed temperature, see: Setting “Set-Back” Feature. The oven will automatically go into Setback mode after the pre-programmed non-usage time. The display will indicate “SETB”. This is an energy-saving feature.

Pressing the COOL DOWN key will deactivate the heat, turn the fan on high and light its LED. This display will indicate “OPEN DOOR” if the door is closed, prompting the user to open the door slightly. With the door open slightly the display will indicate “COOL”. The Cool down will operate when the door is closed or opened slightly. Optimal cool-down will be achieved with the door open slightly. When the door opens wider, the Cool Down mode will deactivate and the display

Page 10 Part # 1955203 (12/06)