Garland SH/WO/IN 5000 Guidelines For Assembly, Mounting Instructions, Continued - Cut Out

INSTALLATION continued

Figure 2 Continued - Cut Out

4 HOLES

CUTOUT

9.125" x 7"

[231.8mm x 177.8mm]

Instructions For Assembly:

Induction Built-In Units

Garland has made enhancements for the installation requirements for the induction cooker built-in models. These changes are designed to provide the installer with greater details for installation. Meeting these requirements will reduce failure due to installation deficiencies

NOTE: BI Units not installed correctly will have warranty Voided.

Guidelines For Assembly

The underside and sides of the induction unit must be absolutely clear of obstructions to provide for adequate cooling air to enter and exhaust. Install a flexible air duct including shackle provided with your built-in induction cooker. Clearances between openings for air supply and air exhaust to obstacles (walls or floors), must be maintained to provide clearances of at least 4” (102mm). The outgoing air must leave without any obstacles.. In addition, make sure that the in-coming and outgoing exhaust air do not mix.. We recommend guaranteeing the supply of fresh air by using a tube with screens, vent ducts or Air Intake Kit.

It is highly recommend that an exhaust fan be installed into the cabinet.. This will force hot air out the cabinet and away from the cooker.. (See figures # 3, 4 & 5)

The fat and grease filter should be in visible view and labeled.. A blocked grease filter can cause internal damage!

Mounting Instructions

As soon as the above mentioned preparations are made, the completely pre-mounted induction unit can be installed into the counter. Apply silicone, which is provided with every air Intake Kit, completely around the underside of this stainless steel frame before lowering the induction cooker onto the counter top. Once the built-in induction cooker is in place, food save silicone may be also applied completely around stainless steel top trim, this is highly recommended. Silicone properly installed, will provide a good seal completely around the induction cooker and stop moisture from entering into the cooker. This moisture or grease will cause damage to the electronic components.

Page 14 Part # 4520898 (03/31/11)