Garmin PAV80 operation manual Aux Entertainment Audio and AUX Enable, Unit Installation

PS Engineering

PAV80 Series IFE System

Installation and Operator’s Manual

2.4.5Aux Entertainment Audio and AUX Enable

Besides the disc and AM/FM, the PAV80 has the ability to act as a switching control for an additional en- tertainment input, both audio and video.

The audio input is Pin 7 (R), Pin H (L) with respect to Pin F (ground). The video input is Pin 17 (with respect to Pin U)

2.5Unit Installation

To install the PAV80, gently slide the unit into the mounting rack until the hold-down screw is engaged. While applying gentle pressure to the face of the unit, tighten the 3/32" hex-head in the unit until it is se- cure. DO NOT OVER TIGHTEN.

Warning: Do not over-tighten the lock down screw while installing the unit in tray.

Internal damage will result.

2.6PVT801 Display Installation:

The PVT801 is designed to be portable. Install display connectors in a location convenient to the user. The supplied cable from installed connector to the display is six feet (6’).

Install the 5-pin display connector (550-005-2522) in a location convenient to the user, perhaps close to the passenger headphone jacks.

AVelcro-strap display case is available from PS Engineering, 1-800-427-2376. In addition, a portable mounting bracket, PS PN 430-800-1362, is available that can hold the PVA801 with double sided tape.

Figure 2-8 Portable mounting bracket with PVA801 attached

2.7OPTIONAL PVA802 Video Distribution Amplifier Installation

The PVA802 Distribution amplifier is a remote mounted unit that provides 12 VDC power and composite video to multiple displays. This should be mounted as close to the display connectors as practical.

200-800-0101 Page 2-6 Rev 2 Sept. 2003