Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
2.2.3a PoE(Power Inside), model PI6KP8-45RJ (MDIX), 8-port 10/100Mb
The New PoE RJ-45 ports act similar to regular RJ-45 ports, except they have capability
of providing power on each port to power up the PD devices, per the IEEE802.3af PoE
standard. Only 4 x RJ-45 (10/100) ports max. support POE(Power Inside) option in one
rack mounted 6K-unit. The power inside PoE option is factory configured and equipped
with the necessary power option to support four 802.3af PoE pd devices. The 4-RJ45
POE module are also available with mix –n-match with fiber modules. Please check the
ordering information Sec.1.2. for all the various PI6K PoE modules option.
The LEDs on 6KP8-RJ45- PoE module are slightly different compared to
regular (non-PoE) RJ-45 modules as shown in Fig 2. When the PoE port is in use, the
PoE LED is ON when connected properly to an 803.af compliant PD device on that port.
When non-PoE devices are connected, the PoE LED is OFF. Operation of Ethernet data
traffic is not affected by PoE.
LINK and ACTIVITY LEDS are combined on the PoE modules into one LED
that is marked as LINK/ACT, as shown in the diagram.
2.2.3b PoE(Power Pass-through), model P6KP8-RJ45 (MDIX), 10/100Mb 8-port
The PoE (Power-pass-through) RJ-45 ports act similar to regular RJ-45 ports,
except they have capability of providing power on each port to power up the PD devices,
per the IEEE802.3af PoE standard. The Power Pass-through PoE modules are totally
dependent upon the powerful -48VDC input power supply to support more RJ-45
(10/100) ports. Each port requires at least 15watts to power up the PoE PD devices max.
One PoE module can be configured in the A, B, C or D slot of any 6K s with
-48vdc power input. The PoE modules are also available with mix & match fiber
15
www Garre ttCom com
..