Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
modular slot. Since the Magnum 6K32F Series Switches have dual-speed
capability for copper ports, the 6 or 8-port interfaces are designed to support all
standard Ethernet media types at 10 or 100Mps speed. Each 6K32F PM can
provide two, four, six or eight ports for connecting Ethernet segments with its
individual connector type and media.
For a list of 6K32F Series Port Module types, refer to Section 1.2
Each 6K PM is individually described in the following sections.
NOTE: The port #1 on the RJ-45 ports on all the modules, either all
RJ-45 ports or used for COMBO module is set as (=) as other ports.
5.2.1 6KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-ST “twist lock” Combo Module The Magnum
6KP6-RJMST is a combo 6
port module of RJ-45’s at
10/100Mbps and fiber optic
ports at 100MB. The Combo
module is equipped with
dual-mode ST-type
connectors and dual speed
copper ports. The ST-
connector functions as a f
optic transceiver to sup
100BASE-FX network
segments. When installed in a Magnum 6K32F Series Managed Switch, the copper port
supports the standard distance 100m on each port and the fiber port supports fiber optic
cable distances up the IEEE-standard 100Mb
iber
port
ps distance limits, i.e., typically 2km at full-
duplex an
he
10/100 LED indicates the speed, if the LED is ON 100Mbps if it is OFF 10Mbps.
0Mb
T-
d 412m at half-duplex.
Each port has an Activity (ACT) LED indicating packets being received, a
Link (LK) LED that indicates proper connectivity with the remote device when lit, and
FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). T
The 6KP6-RJ10ST is a six port combo module that looks similar to the 10
combo module with the exception of 10Mb speed at the ST fiber module. The S
48 www Garre ttCom com
..