Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
traffic is not affected by PoE.
LINK and ACTIVITY LEDS are combined
hat is marked as LINK/ACT, as shown in the diagram
PoE ED
on the PoE modules into one LED
. t
L s Summary
For P• oE devices, each RJ-45 PoE port supports only 802.3af complaint
devices. The PoE LED is ON when the attached PD is drawing power from th
port. e
• For non-PoE devices connected, the PoE port will act as a normal RJ-45 port
and the PoE LED is OFF. No power is being sent out from the port.
The PoE ports in Magnum 6K’s with 48VDC power input act as a pass-
through, so the 48VDC
• power source
• s for some reas
simultaneously to indicate a trouble condition. The ports will still operate
100Mbps RJ-45 and 2@100Mb multi-mode actor
must be strong enough to provide power
wer
on, all the PoE port LEDs are ON
to the 6K switch and to all the 8 RJ-45 ports with PD devices connected (up to
15 watts per PoE port).
In the case where the 48VDC power in not internally connected and no po
is coming to the PoE port
properly for data traffic.
.2.11 @ 10/5 6KP8-45-2MT, 6FX , MTRJ Small-Form-F
nd
he
distances as mentioned on 5.2.3. and the LEDs also act similarly.
The Magnum 6KP8-
45-2MT eight port Module is a
combo module with copper a
fiber (Small Form Factor)
MTRJ type ports. The small
sizes of MTRJ connectors give
an advantage of placing more
fiber ports on one module. T
6KP8-45-2MT is equipped
with six 10/100 RJ-45 ports
and two 100Mb MTRJ fiber
ports. When installed in a Magnum 6K32F Series Switch, it supports the standard
57
www Garre ttCom com
..