Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
3 www Garre ttCom com
..
Fuse Required – 3 Amps
125VDC and 100VDC Input Voltage : 88 to 300VDC
Fuse Required – 1 Amp
Std. Terminal Block : “ -, GND, + ”
Power Consumption: same as for AC models, see above
Warning- All the fuse replacement must be replaced with same value.
For (Optional) DC internal power supplies at –48VDC, 24VDC and 125VDC, including Dual Source options (for continuity of operation when either of the DC
input sources are interrupted), see Appendices B and C.
Cooling Method- 6K32F/ 6K32FR(Reverse)- Fan cooled (3 fans inside)
6K32FC / 6K32FRC(Reverse)- Convection cooled (No fans) Static Thermal
design techniques
Relay Alarm Contact (Optional) The Alarm Contact option is offered as a configuration option. The alarms can be
initiated through two normally closed Form-C contacts, one loss of power alarm
and one software alarm through user selectable software traps.
Per-port MDI or MDIX on RJ-45
The copper daughter board has MDI-MDIX Auto-crossover on all the RJ-45
ports which eliminates the use of cross-over cable between the devices. Also
port-specific user settings (such as FDX or HDX, copper 10/100 speed) can
be fixed using software commands.
Agency Approvals
UL listed (UL60950), cUL, CE, Emissions meet FCC Part 15, Class A
NEBS L3 and ETSI Compliant, NEMA TS-2 for traffic control
IEEE 1613 Classs 2 Environmental Standard for Electric Power Substations.
See also Note for Power Substations in Section 3.2.4, 3.6.1, and 5.2.9
IEC61850 EMC and Operating Conditions Class C for Power Substations
Warranty: Three years, return to factory Made in USA
For a Configuration Guide, see the GarrettCom web site at
http://www.garrettcom.com/techsupport/insertion_guides/6k32fcg.pdf (6K32F /
FR)
http://www.garrettcom.com/techsupport/insertion_guides/6k32fccg.pdf
(6K32FC / FRC)
Email mktg@GarrettCom.com for additional details.