Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
Step 2. Remove Chassis Cover
The Magnum 6K32F chassis are combined with top, bottom and module panel
parts and assembled together with the help of 34 Philips-head screws. First
Remove the side panel (2 screws located on the right side of chassis). Second,
remove the module panel screws (total 16) as shown in the fig 3.5.1a. Third,
remove the top cover screws (16 screws). Once these are removed, the top
cover can be easily pulled off to the front from the chassis base, as shown in
the Fig. 3.4.1b. When the chassis top cover has been removed, the interior of
the unit is exposed.
Figure 3.5.1a: Removing module panels after the screws being removed
Fig 3.5.1b: Pulling out the top cover from the chassis base
37
www Garre ttCom com
..
Caution: Be careful not to disturb the power supply.