![](/images/backgrounds/140189/bg40.png)
Magnum 6K32F/FR/FC/FRC Managed Switch Installation and User Guide (05/08)
5.2.11a 6KP8-45-2LC, 6@ 10/100Mbps RJ-45 and 2@100Mb single-mode FX , LC Small-Form-Factor The Magnum 6KP8-
45SLC eight port Module is a
combo module with copper and
fiber (Small Form Factor) LC
type fiber ports. The small size
of LC connectors give an
advantage of placing more ports
on one module. The 6KP8-45-
2SLC is equipped with 6 10/10
RJ-45 ports and 2 Single-mode
fiber ports. When installed in a Magnum 6K32F Series Switch, it supports the stan
distances as mentioned on 5.2.4. and the LEDs also act similarly.
0
dard
.2.12 GBIC-SXSC Gigabit fiber(1000Mb), multi-mode SC Connector 5 The Magnum GBIC-SXSC is
a multi-mode Gigabit fiber connector
equipped with SC type connectors and
can be easily snapped in and out. The
Gigabit fiber ports are most popular as
server-to-switch and switch-to-switch
applications. It supports cable distances
up to the IEEE 802.3z standard 1000Mbps distance limits, i.e., 550m at full duplex.
The GBIC transceiver has been offered in the modular slot with multiple options as per
the user requirement. The two Giga port has been offered as GBPM-2OTX (fiber or RJ-
45), whereas the single Gigabit module comes in options of G+2 (100Mb fiber ports) or
G+4(10/100 RJ-45 ports) as shown in the above figure.
The GBIC transceiver is fastened using snap-in clips. Insert the transceiver
(take care to insert it the right way up, arrows on top) until it clicks in place. While
removing the transceiver, press the clips on either side of the transceiver at the same time
and pull the transceiver out.
Each port has an Activity (ACT) LED indicating packets being received and a
Link (LK) LED indicating proper connectivity with the remote device when lit.
58 www Garre ttCom com
..