GarrettCom 6K32T 5.2.1 6KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode, FX-ST “twist

Magnum 6K32T & 6K32TRC Managed Switch Installation and User Guide 05/07)

5.2.16KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode

FX-ST “twist		6KP6-RJMST,
lock” Combo	4 Port@ 10/100Mbps and 2 @100 Mb ST Fiber Port
Module			2
The Magnum 6KP6-		1	3	5	7		1
RJMST is a combo 6 port		10/100				LK
module of RJ-45’s at		F/H				ACT
	4	ACT		ACT
10/100Mbps and fiber optic		F/H		F/H	TX LK	RX	3
		2 TX	LKRX	6
ports at 100MB. The Combo	1	LINK		2	10/100
module is equipped with dual-
				4
mode ST-type connectors and	3	ACTIVITY			FULL/HALF

dual speed copper ports. The ST-connector functions as a fiber optic transceiver to support 100BASE-FX network segments. When installed in a Magnum 6K32T & 6K32TRC Managed Switch, the copper port supports the standard distance 100m on each port and the fiber port supports fiber optic cable distances up the IEEE-standard 100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half-duplex.

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed, if the LED is ON 100Mbps if it is OFF 10Mbps.

5.2.1a 6KP6-RJ10ST, 4@10/100Mbps RJ-45 and 2@10Mb multi-mode FX-ST “twist lock” Combo Module

The 6KP6-RJ10ST is a six port combo module that looks similar to the 100Mb combo module with the exception of 10Mb speed at the ST fiber module. The ST-connector functions as a fiber optic transceiver to support 10BASE-FX network segments. When installed in a Magnum 6K32T & 6K32TRC Managed Switch, the copper port supports the standard distance 100m on each port and the fiber port supports fiber optic cable distances up the IEEE-standard 10Mbps distance limits, i.e., typically 2km at full-duplex and half-duplex.

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed, if the LED is ON, 100Mbps if it is OFF, 10Mbps.

www . GarrettCom . com

51