GarrettCom 6K32T The Magnum 6KP6, RJMSC is also a Combo 6 Port, module equipped with 4 10/100Mb

4 Port@ 10/100Mbps and 2 @100 Mb SC Fiber Port 2

Magnum 6K32T & 6K32TRC Managed Switch Installation and User Guide 05/07)

connectors and configured as 10Mb Half-duplex by default for 10Mb fiber and 100Mb Full duplex for the 100Mb fiber. The 10Mb ST-fiber ports allow the user to connect their legacy 10Mb network to the Magnum 6K32T & 6K32TRC switch. They also provide a convenient way for the half duplex hub to connect to the switch through 10Mb fiber ports. Whereas the 100Mb ST module allow to connect the 100Mb demand of Switch devices. It supports distances according to the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-mode for 10Km distance may be available as a special order).

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating proper connectivity with the remote device when lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).

5.2.2.6KP6-RJMSC 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-SC “snap-in” Fiber connector

The Magnum 6KP6-				6KP6-RJMSC,
RJMSC is also a Combo 6 Port
module equipped with 4 10/100Mb
			1		3		5		7
RJ-45 ports along with 2 multi-			10/100							LK
										ACT
mode 100Mbps fiber optic			F/H
	4		ACT			ACT
			F/H			F/H
										RX
				2 TX LK RX		6
transceivers all in one module. This		1						TX	LK
			LINK			2	10/100
is similar to the 6K6-RJMST. It has
the same LEDs indicating port		3	ACTIVITY			4	FULL/HALF
activity (ACT), Link (LK), and

FDX / HDX and 10/100 operation, and the same face-plate lettering.

1

3

While the functionality of these two modules is essentially the same, the 6KP6- RJMSC is equipped with an SC-type "snap-in" connector instead of an ST-type.

www . GarrettCom . com

53