Magnum
Figure below 3.6.2c, screw down tightly with the three 5/16 stand-off (male) on the top of the Granddaughter board. The three 5/16 stand off has been used to place the daughter board on the top of the granddaughter board and a latch connector to hold it securely.
Fig 3.6.2b Granddaughter
Board shown separately
Female latch connector
Fig 3.6.2c Granddaughter Board placed in slot & secured with three 5/16 standoff’s
Step 3. The figure here illustrates the basic layout of an individual PM card. Each 6KPM card fits into the space provided on the main board.
Fig. 3.6.2d Daughter Board, top view of
4 copper 10/100 ports
Fig 3.6.2e Daughter Board shown upside down with two male latch connectors
Step 4. Hold the daughter board with both hands at the end and insert the 6KPMV module inside the front face plate slot carefully. Then align the two cream color latching connectors (male) placed at the bottom of the daughter board with the other female connector placed on the Granddaughter and main board. As shown below in Fig. 3.6.2f.
Fig. 3.6.2f Magnum 6KPM daughter board aligned with the bottom latch connector after inserted properly in front plate slot
www . GarrettCom . com
35
