Magnum 6K8-Series Industrial Field Switch | Installation and User Guide 03/06) |
5.2.16KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-ST “twist lock” Combo Module
The Magnum 6KP6-RJMST is a combo 6 port module of four RJ-45’s at
10/100Mbps and two fiber optic ports at 100MB. The Combo module is equipped with |
dual-mode ST-type connectors | | 6KP6-RJMST, | | |
and dual speed copper ports. | | | |
4 Port@ 10/100Mbps and 2 @100 Mb ST Fiber Port | |
| |
The ST-connector functions as | | | 2 | | | | |
a fiber optic transceiver to | | 1 | 3 | 5 | 7 | | 1 |
support 100BASE-FX network | | 10/100 | | | | LK | |
| | | | | | |
segments. When installed in a | | F/H | | | | ACT | |
4 | ACT | | ACT | | | |
Magnum 6K8-Series Managed | F/H | | F/H | TX LK | RX | 3 |
| 2 TX | LKRX | 6 |
Switch, the copper port | 1 | LINK | | 2 | 10/100 | | |
supports the standard distance | 3 | ACTIVITY | 4 | FULL/HALF | |
100m on each port and the fiber | |
| | | | | | |
port supports fiber optic cable distances up the IEEE-standard 100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half-duplex.
Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed, if the LED is ON 100Mbps if it is OFF 10Mbps.
5.2.1a 6KP6-RJ10ST, 4@10/100Mbps RJ-45 and 2@10Mb multi-mode FX-ST “twist lock” Combo Module
The 6KP6-RJ10ST is a six port combo module that looks similar to the 100Mb combo module with the exception of 10Mb speed at the ST fiber module. The ST-connector functions as a fiber optic transceiver to support 10BASE-FX network segments. When installed in a Magnum 6K8-Series Managed Switch, the copper port supports the standard distance 100m on each port and the fiber port supports fiber optic cable distances up the IEEE-standard 10Mbps distance limits, i.e., typically 2km at full- duplex and half-duplex.
Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed, if the LED is ON, 100Mbps if it is OFF, 10Mbps.
www . GarrettCom . com
