Gateway 205 Appendix A: Safety, Regulatory, and Legal Information

Appendix A: Safety, Regulatory, and Legal Information

www.gateway.com

■Read and follow all instructions marked on the product and in the docu mentation before you

operate the projector. Retain all safety and operating instructions for future use.

■Do no t use this prod uct ne ar wa ter o r a he at so urce such as a r adia tor.

■Set up the projector on a stable work surface.

■The product should be operated only from the type of power source indicated on the rating label.

■If the projector is connected to a computer, make sure that the voltage selector switch is in the

proper position for your area. The voltage selector switch is set at the factory to the correct

voltage.

■Openings in the projector case are provided for ventilation. Do not block or cover these

openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the projector

for ve nti latio n whe n you set u p you r wor k are a. Ne ver i nser t obj ects of an y kin d int o the

ventilation openings.

■Some products are equipped with a three-wire power cord to make sure that the product is

properly grounded when in use. The plug on this cord will fit only into a grounding-type outlet.

This is a safety feature. If you are unable to insert the plug into an outlet, contact an electrician

to install the appropriate outlet.

■If you use an extension co rd with this projector, make sure that the total ampere rat ing on the

products plugged into the extension cord does not exceed the extension cord ampere rating.

■If the projector is connected to a product fitted with a TV Tuner, cable, or satellite receiver card,

make sure that the antenna or cable system is electrically grounded to provide some protection

against voltage surges and buildup of static charges.

■Do no t wal k on t he po wer c ord o r allo w an ythin g to r est o n it.

■Do not spill anything on the projector. The best way to avoid spills is to avoid eating and

drinking near the projector.

■When the projector is turned off, a small amount of electrical current still flows through the

projector. To avoid electrical shock, always unplug all power cables from the wall outlets and any

other cable connections before cleaning the projector.

■Unplug the projector from the wall outlet and refer servicing to qualified personnel if:

■The power cord or plug is damaged.

■Liquid has been spilled into the projector.

■The projector does not operate properly when the operating instructions are followed.