Using the Gateway 205 Projector

Operating the projector

After you have connected all components to the projector, you are ready to begin using the projector.

Starting the projector

To start the projector:

1

2

3

Press the POWER button. The power LED turns on.

Turn on the connected components.

After all components are running, allow about 30 seconds for the display image to appear. If the power LED is not green or you do not see a display image, check the connections. For more troubleshooting information, see “Troubleshooting” on page 32.

Use the lens adjustment wheels to adjust the display image.

You can also use the on-screen display (OSD) to make additional display setting adjustments if necessary. For more information, see “OSD options” on page 23.

22

www.gateway.com

Page 24
Image 24
Gateway 205 specifications Operating the projector, Starting the projector, To start the projector