Follow the instructions in “Closing the server case” on page 28. Turn on your server.
Connect the power and data cables.

Replacing the system board

11 Install the memory, processor, and heat sink, then reconnect the heat sink cooling fan to the system board.

12

13 Install the expansion cards. For more information, see “Installing PCI expansion cards” on page 40.

14

15

16 Press F2 when the Gateway logo screen appears during startup. The BIOS Setup utility opens.

17 Check BIOS settings to make sure that they detect the server’s new hardware, then save your changes (if any) and close the BIOS Setup utility.

 

www.gateway.com

49