Error messages

Invalid partition table

The master boot record may be corrupt. For troubleshooting information, see “The master boot record is corrupted” on page 76.

Invalid password

Enter your password again. Some passwords are case sensitive.

If you do not know the password, you may need to reinstall the software you are trying to access.

System startup passwords are stored in BIOS. If this password has been set and you do not know it, you may be able to reset the password through system board jumper settings. For more information, see “Bypassing the BIOS passwords” on page 61.

Memory errors were detected while the system started up

See “Memory errors were detected during server start up” on page 77 for a possible solution.

Memory size error

Restart your server, then press and hold F2 to open the BIOS Setup utility. Save the memory configuration.

Missing operating system

The master boot record may be corrupt. For troubleshooting information, see “The master boot record is corrupted” on page 76.

System Event Log Full

Clear the event log. To clear or view the event log, restart your server, then press and hold F2 to open the BIOS Setup utility. Select the Advanced menu, then select the Event Log Control menu.

www.gateway.com

69