Chapter 5: Using the BIOS Setup Utility

6 Turn on the server. You can now open the BIOS Setup utility or perform other server tasks.

7

8

9

If you want to change the passwords, press F2 when the Gateway logo screen appears. When the BIOS Setup utility opens, you can clear or change the passwords, or change other BIOS settings.

Turn off the server, disconnect the power cord, and remove the side panel again.

Remove the jumper from pins 1-2 of jumper J13 and place it over just one of the pins for storage.

Close the case, reconnect the cords, then turn on the server.

62

www.gateway.com