Gateway ALR 9000 Connecting Peripherals, Figure 1: Connecting Peripherals, 1.Connect the keyboard to the keyboard port

Connecting Peripherals

Refer to the illustrations and procedures below when connecting peripherals to your system.

Figure 1: Connecting Peripherals1.Connect the keyboard to the keyboard port.

2.Connect the monitor video cable to the video port. The location of the port may vary depending on the type of video card installed in your system.

3.Connect the monitor power cable to an AC outlet or preferably, a surge control outlet station.

4.Verify that the Voltage Selection Switch on each power supply is set for the proper voltage in your area (115V or 230V).

Using the power cable(s) supplied with your system, connect the the power supply to an AC outlet. If your system is equipped with more than one power supply, connect each of the power supplies to a separate AC outlet.

4 Gateway ALR 9000 User’s Guide